Switch to mobile website Switch to full website

Maker Lab: Laser Studio • Thu, May 17 at 6:30PM Instructed by Steve Morris and Universal VLS4.60 Laser Cutter

So, you have taken a Laser 101 class and now you want to get some practice with your new skill, or perhaps some project mentoring on what you have in mind - Maker Lab: Laser Studio Time is an ideal evening to come to the makerspace and get some help.

Laser time is available on a first-come-first-served basis, and will be limited to ensure everyone gets a turn.

Project mentoring and Corel Draw advice will be freely available. Our rule of thumb is: 90% of the project is all in the design setup.

The only pre-requisite is to have taken the Laser 101 class before attending Laser Studio Time.

Save $$$:
Purchase a Laser Studio Pass with the Laser 101 class and get $10 off
Purchase two Laser Studio Passes with the Laser 101 class and get $15 off
Laser Studio passes are good for six months from date of purchase!

Special instructions

For evening and weekend classes:

The World Building is closed in the evenings and on Sundays, but Catylator is still open! To get access to our space during those times, simply dial us up through the silver Sentex directory box to the left of the front door and we will buzz you in.

We understand that circumstances sometimes arise that mean you won't be able to attend a course, class, camp or workshop you have signed up for.

If you believe you are going to be late or miss a course, class or workshop, please let us know at least 24 hours before the start of class, and we will gladly transfer your enrollment to a later date. You may call 301-588-8833, or email info@catylator.com.

Due to limited spaces in our classes, if you fail to show up for a class, and you haven't contacted us 24 hours in advance, your class fees will not be refunded.